Create a gold heat-embossed greeting using a BetterPress plate, then frame it with dimensional embossing and a red ink-blended background. This step-by-step Christmas card tutorial demonstrates an additional way to use your press plates: transfer clear embossing ink to cardstock, cover the impression with powder, and melt it with a heat tool.
If you already use the BetterPress system and want to explore another finish, this project walks through the sequence from preparing the ornate frame to adding the final embellishments. Gold details, a small poinsettia, and pearls complete the card while keeping the large greeting as the focal point.
Hello, crafty friends! Marie here from Marie Nicole Designs. I’m sharing how I used the Upright Italic Season’s Greetings Press + Foil Plate by Paul Antonio for this Christmas design. Never too early for Christmas crafting!
Project Snapshot
| Project Type | Handmade Christmas card |
|---|---|
| Techniques | BetterPress ink transfer, heat embossing, 3D embossing, ink blending, and dimensional assembly |
| Occasion | Christmas and seasonal greetings |
| Color Palette | Red and gold |
| Featured Products | Upright Italic Season’s Greetings Press + Foil Plate and A2 Ornate Molded Frame 3D Embossing Folder |
What You’ll Need
Spellbinders Supplies
- Upright Italic Season’s Greetings Press + Foil Plate by Paul Antonio - BP-371
- A2 Ornate Molded Frame 3D Embossing Folder by Yana Smakula - E3D-179
- BetterPress Letterpress System - BP-001
- Platinum SIX Die Cutting & Embossing Machine - PE-104
- A poinsettia die set from Marie’s supplies; exact set to confirm
Other Supplies
- Cardstock for the embossed frame and card base
- White cardstock for the ink-blended background
- Clear embossing ink
- Gold embossing powder
- Embossing heat tool
- Light and dark red inks
- Ink-blending tool
- Gold paint marker
- Dry paintbrush for removing stray powder
- Scissors
- Foam adhesive and liquid adhesive
- Gold pearls
How to Heat Emboss with a BetterPress Plate
Begin by dry embossing the frame, then use the press plate to transfer clear embossing ink into its center. Add powder and heat it to create the gold greeting.
Step 1 - Emboss the Ornate Frame
Choose cardstock for the framed panel. Place it inside the A2 Ornate Molded Frame 3D Embossing Folder and emboss using the combination recommended for your machine and folder.
The open center of the frame provides a place for the greeting.
Step 2 - Align the Sentiment Plate
Place the Season’s Greetings plate on the magnetic platform of the BetterPress Letterpress System.
Position the cardstock on the clear platen according to the system instructions. Check the plate placement against the cardstock so the greeting will sit where you want it inside the embossed frame.
Step 3 - Apply Clear Embossing Ink
Ink the plate with clear embossing ink.
Marie’s Tip: Clear embossing ink can be difficult to see on the plate. Take care as you apply it rather than expecting the same visible coverage as a colored ink.
Step 4 - Press the Greeting into the Panel
Place the clear platen with its attached cardstock over the inked plate. Run the assembled system through your compatible machine using the recommended BetterPress setup.
In my project, I was able to add the pressed greeting while retaining the embossed frame detail.
Remove the cardstock carefully. The embossing ink is still wet, so avoid touching or smearing the impression.
Step 5 - Cover the Greeting with Gold Powder
Sprinkle gold embossing powder over the wet impression and tap off the excess.
Marie’s Tip: Use a dry paintbrush to remove stray powder from areas where you don’t want it before heating.
Step 6 - Heat Emboss and Trim the Frame
Melt the powder with an embossing heat tool to set the greeting. Once the heat embossing is finished and the panel has cooled, carefully cut around the outside of the embossed frame with scissors.
How to Assemble the Christmas Card
The trimmed frame is smaller than the full background. Add an ink-blended border behind it, then finish with gold details and a poinsettia.
Step 7 - Ink Blend the Red Background
Prepare a white cardstock background sized for your card. Blend a lighter red ink over it, then layer a darker red to develop the color.
Marie’s Tip: I started with a lighter red and layered a darker red over it until I had the Christmas color I wanted.
Step 8 - Mount the Framed Sentiment
Add foam adhesive generously to the back of the trimmed frame. Remove the release liners, center the frame over the red background, and adhere it.
Step 9 - Highlight the Frame in Gold
Use a gold paint marker to color the middle embossed strip around the frame.
I love how the gold paint and gold sentiment both shine on the finished design.
Step 10 - Add the Poinsettia and Pearls
Finish with a small poinsettia die-cut and a few gold pearls. I used a poinsettia from an earlier Spellbinders set in my supplies.
The large sentiment remains the focal point, with the flower and pearls providing the finishing details.
Tips for the Best Results
- Check alignment before inking. Position the sentiment to fit within the open center of the embossed frame.
- Handle the pressed panel by its edges. Avoid touching the wet embossing ink before applying powder.
- Remove stray powder before heating. Marie uses a dry paintbrush to clean up unwanted particles.
- Build the background color in layers. Marie combines lighter and darker red inks to reach her preferred shade.
- Support the framed panel with foam adhesive. Apply it across the back before centering the frame over the background.
Ways to Customize This Project
Try a different embossing-powder color, change the ink-blended background, or choose another small seasonal embellishment. You could also explore the same framed layout with a greeting for another occasion.
These are suggested variations on Marie’s photographed project. When changing cardstock or your pressing setup, try the technique on a spare panel first to see how the ink transfers and how the existing embossed texture responds.
Frequently Asked Questions
Can you heat emboss a greeting with a BetterPress plate?
Yes. In this project, Marie applies clear embossing ink to the plate and transfers it to cardstock with the BetterPress system. Gold embossing powder is added to the wet impression and melted with a heat tool. The plate transfers the ink; the heat tool is used afterward on the powdered cardstock.
What ink is used for this heat-embossing technique?
Marie uses clear embossing ink so the transferred impression can hold embossing powder. The specific ink brand is not identified in the source. Because clear ink can be difficult to see, apply it carefully and avoid touching the pressed greeting before covering it with powder.
Can you press a sentiment onto an already embossed panel?
Marie dry embossed her frame first, then pressed the greeting into its center. She retained the frame detail in this project. Paper and setup choices can affect the result, so try your combination on a spare panel before working on the final piece. The source does not identify her cardstock or exact shim configuration.
How do you remove embossing powder from unwanted areas?
Tap away the excess powder after covering the wet impression. Before heating, use a dry paintbrush to remove particles from areas outside the greeting. This is Marie’s cleanup method for the card. Check the panel before using the heat tool, while the loose powder can still be brushed away.
More Embossing and Christmas Card Ideas from Spellbinders
- Explore another project in How to Heat Emboss with BetterPress Plates: Snowman Christmas Card.
- Build your background skills with Ink Blending for Beginners.
- Compare a different sentiment finish in this hot-foiled Christmas card with stripes and layered arches.
Heat embossing gives this pressed greeting a gold finish that coordinates with the highlighted frame and pearls. Begin with the ink transfer, clean up the powder, and heat it before assembling the card. I hope seeing the process gives you another idea for using your press plates and combining them with embossed backgrounds. Thank you so much for stopping by to craft with me!

1 comment
What a lovely card!